Prices incl. VAT plus shipping costs
- Order number: POPE700168
- EAN: 4251295700168
- Manufacturer: Popp
You want to be informed when it starts raining and your windows are still opened? Or you want to control your garden watering intelligently and you want to note the rainfall as well? The POPP Z-Rain enables this in your Z-Wave Smart Home.
The Z-Rain has an internal rocker, where the rainwater is collected until the weight of the water tilts the rocker. The tilting will be registered from a reed sensor and counted as well. Based on that the rainfall will then be calculated.
With the first tilt of the rocker and therefore right to the beginning of the rain you will receive the first value from the Z-Rain. Then you can get a push-message or E-Mail, if one of your windows is still opened and your awning will close automatically.
The great advantage of the Z-Rain is, that it not only detects rain but also measures the exact amount of rain. A small little shower is not always a reason to close your side windows. You can also configure the value of rain, when you want to be informed about the rain. During a rain fall the Z-Rain reports the amount of rain every 1024 seconds in m3 (total sum of the rainfall), mm per m2 and mm/h (current strength of the rainfall) to the Smart Home Gateway. When the rainfall stops, the last measured value will be sent to the gateway. Afterwards the value will become nil again. With that you can turn off your garden watering with the beginning of a rainfall and turn on the next watering cycle based on the measurements of the last rainfall.
Thanks to Z-Wave and the operation with two standard AAA batteries the Z-Rain can be placed anywhere in your garden. Because of the integrated battery booster technology, the Z-Rain could possibly have lifetime of up to 5 years depending on the wake-Up interval.
- Rain sensor/ Rain gauge
- Measures volume of rainfall in mm/h (cumulates the last 1024 seconds to 1 hour)
- Protection Class: IP55
- Power Supply: 2x AAA batteries (lifetime: 5 years, depends on wake-up interval)
- Scope of Delivery: 1x Z-Rain, 2x AAA batteries (alkaline)
- Wireless Technology: Z-Wave Plus
- Dimensions: 132x132x139 mm
|Article Dimensions (WxHxL)||132 x 132 x 139 mm|
|Package Dimensions (WxHxL)||140 x 140 x 152 mm|
|Article net weight||0.240 Kg|
|Article gross weight||0.335 Kg|
Introduction To Z-Wave Plus™
Z-Wave Plus™ is a new step within the Z-Wave certification process, designed to help consumers identify products that take advantage of the recently introduced 'GEN5' Z-Wave hardware platform, also known as 500 Series or 5th Generation Z-Wave. Z-Wave Plus certified solutions feature a selected set of extended features and capabilities that enhance the end user experience and make Z-Wave installations even faster and easier to install and set up.
Z-Wave has led the market in interoperable smart devices for the home since the first Z-Wave product was certified in 2004. With the introduction of the GEN5, Z-Wave 500 series hardware platforms, Z-Wave saw its ecosystem bolstered with new capabilities – including increased range, extended battery life, Over-The-Air upgrading (OTA), additional RF channels and more.
Products with Z-Wave Plus™ are fully backwards compatible with existing Z-Wave products!
For consumers, homeowners, integrators and service providers, these enhancements offer tremendous benefits in terms of faster and easier installations, more extensive device profiles, improved self-healing and longer battery life. With the new Z-Wave Plus certification program, the Z-Wave Alliance is introducing a series of packaging logos that will be located on every Z-Wave Plus™ certified product, informing the consumer this product incorporates the enhanced capabilities of the Z-Wave 500 series.
- 50% improvement in battery life
- 67% improvement in range
- 250% more bandwidth
- Three F channels for improved noise immunity and higher bandwidth
- New Plug-and-Play network-wide inclusion functions
- Improved self-healing and fault tolerance with Explorer Frame feature
- Standardized method for Over-The-Air firmware updates (OTA)
- Improved product information capture for product certification database
|Z-Wave Controller||Controller Revision||Article Revision||Compatibility status||Comment|
|MCV_VERA_EDGE||1.7.2230||1.1||not compatible||elements are not correctly displayed|
|MCV_VERA_EDGE||1.7.2236||1.1||not compatible||elements are not correctly displayed|
|MCVEVERA_PLUS||1.7.3831||1.2||partly compatible||total amount of rain does not work|
|ZIP_Zipabox-G1||1.0.17||1.1||partly compatible||associations not successful|
|ZIP_Zipabox-G1||1.2.20||1.1||partly compatible||associations not successful|
|DEVE9278||1.2||partly compatible||total amount of rain does not work|