
Prices incl. VAT plus shipping costs
- Order number: PHI_PST02-1B
- EAN: 4713698570170
- Manufacturer: Philio Tech
- Manufacturer number: PST02-1B
The Z-Wave Plus 3 in 1 sensor is designed with three detection sensors:
1. PIR/Motion
2. temperature
3. illumination
The detector can be used as a security device or home automation device. When the detector is cooperated with security appliances, the detector is acting as a security device by detecting changes in infra-red radiation levels. If a person moves within or across the devices field of vision, a trigger radio signal will be transmitted to cause full alarm condition in order to frighten intruders away. Once night falls, the percentage of ambient illumination is lower than preset value. If a person moves within or across the devices field of vision, a trigger radio signal will be transmitted so as to turn connected lightings for better illumination. Every time when PIR trig, the sensor will also send temperature and illumination value as well. Also the temperature will send out the value when temperature changes. Note: The illumination sensor does not work with Fibaro Homecenter 2 and Zipabox yet.
When included securely the device is able to accept secure commands and to send secure commands to other devices. The commands and the receiver of the commands sent out on single click and on double click of the rocker can be defined in configuration parameters and association groups.
Package Dimensions (WxHxL) | 67 x 131 x 26 mm |
Article net weight | 0.032 Kg |
Article gross weight | 0.074 Kg |
Z-Wave Plus | |
WEEE | |
CE |
Introduction To Z-Wave Plus™
Z-Wave Plus™ is a new step within the Z-Wave certification process, designed to help consumers identify products that take advantage of the recently introduced 'GEN5' Z-Wave hardware platform, also known as 500 Series or 5th Generation Z-Wave. Z-Wave Plus certified solutions feature a selected set of extended features and capabilities that enhance the end user experience and make Z-Wave installations even faster and easier to install and set up.
Z-Wave has led the market in interoperable smart devices for the home since the first Z-Wave product was certified in 2004. With the introduction of the GEN5, Z-Wave 500 series hardware platforms, Z-Wave saw its ecosystem bolstered with new capabilities – including increased range, extended battery life, Over-The-Air upgrading (OTA), additional RF channels and more.
Products with Z-Wave Plus™ are fully backwards compatible with existing Z-Wave products!
For consumers, homeowners, integrators and service providers, these enhancements offer tremendous benefits in terms of faster and easier installations, more extensive device profiles, improved self-healing and longer battery life. With the new Z-Wave Plus certification program, the Z-Wave Alliance is introducing a series of packaging logos that will be located on every Z-Wave Plus™ certified product, informing the consumer this product incorporates the enhanced capabilities of the Z-Wave 500 series.
Features
- 50% improvement in battery life
- 67% improvement in range
- 250% more bandwidth
- Three F channels for improved noise immunity and higher bandwidth
- New Plug-and-Play network-wide inclusion functions
- Improved self-healing and fault tolerance with Explorer Frame feature
- Standardized method for Over-The-Air firmware updates (OTA)
- Improved product information capture for product certification database
The following manuals are available online
Z-Wave Controller | Controller Revision | Article Revision | Compatibility status | Comment |
FIB_HOMEC2 | 4.180 | 1.24 | partly compatible | motion sensor does not work |
ZMEERAZ | 2.3.7 | 1.24 | fully compatible | |
ZMEERAZ | 2.3.0 | 1.24 | fully compatible | |
ZMEEUZBWAY | 2.3.0 | 1.24 | fully compatible | |
ZMEEUZBWAY | 2.3.7 | 1.24 | fully compatible | |
MCV_VERA_EDGE | 1.7.3831 | 1.24 | fully compatible | |
MCVEVERA_PLUS | 1.7.3831 | 1.24 | fully compatible | |
MCVEVERA_SECURE | 1.7.3831 | 1.24 | fully compatible | |
ZMEEUZBWD | 2.3.0 | 1.24 | fully compatible | |
ZMEEUZBWD | 2.3.7 | 1.24 | fully compatible | |
ZMEERAZ2 | 2.3.0 | 1.24 | fully compatible | |
ZMEERAZ2 | 2.3.7 | 1.24 | fully compatible | |
ZMEEUZB1 | 2.3.0 | 1.24 | fully compatible | |
ZMEEUZB1 | 2.3.7 | 1.24 | fully compatible | |
HOMEE-0002 | 2.18.1 | 1.24 | fully compatible |