Top seller
No results were found for the filter!
Aeotec Multisensor 6
Motion sensor. Motion for security. Motion for presence. Motion for management. MultiSensor 6&rsquos motion sensor is perfect for more than just an intelligent security system. With a 5 metre range and a 120° field of view, MultiSensor 6...
Content
1 Item(s)
69.95€
*
(RRP)
Aeotec 4-in-1 Multi-Sensor for Indoor and Outdoor
The Aeotec Multi-Sensor is suitable for indoor and outdoor use, measures and reports the following values: Motion Temperature Humidity Brightness The multi-sensor is IP 43 rated and therefore suitable for both indoor and outdoor use....
Content
1 Item(s)
70.00€
*
(RRP)
Aeotec Recessor for Multi Sensor 6
With the ceiling mount called "Recessor" you can integrate the Aeotec multi sensor into the ceiling - almost invisible and effective. Analogous to integrated ceiling lamps the sensor disappears alsmost complete in the ceiling....
Content
1 Item(s)
19.99€
*
(RRP)
Philio 3 in 1 Sensor (Motion, illumination and...
The Z-Wave Plus 3 in 1 sensor is designed with three detection sensors: 1. PIR/Motion 2. temperature 3. illumination The detector can be used as a security device or home automation device. When the detector is cooperated with security...
Content
1 Item(s)
61.83€
*
(RRP)
Philio 4-in -Sensor (Door,/Window, Temperature,...
The Philio Multi Sensor is a Z-Wave door/ window sensor, motion sensor, luminescence sensor and temperature sensor in one package. Thanks to this the PST02-1A can be uses as a security device or home automation device, e.g. to send an...
Content
1 Item(s)
64.13€
*
(RRP)
Philio 2-in-1 Sensor - Temperature and Humidity
The Philio Sensor is a 2-in-1 Sensor. The sensor measures the humidity (in percent) and the temperature (in Celsius) of its environment. Furthermore the sensor has a tamperswitch, which works as a burglar alarm. By using Z-Wave all the...
Content
1 Item(s)
54.99€
*
(RRP)
Z-Wave Temperature and Humidity Sensor
The ST814 is a combined temperature/humidity sensor which is designed for both - desktop use or wall mountable. The device has a local LCD display which either shows the temperature or the humidity. Four buttons allow to switch between...
Content
1 Item(s)
74.95€
*
(RRP)
POPP Z-Weather
The Z-Weather is an energy-self-sufficient wind and weather sensor, powered by a solar cell. Thanks to the energy management and the internal capacitor the wind sensor sends measured data to the Z-Wave Controller even during the night....
Content
1 Item(s)
199.99€
*
(RRP)
Philio 3-in-1 Sensor (Door/Window, Temperature,...
With the 3-in-1 Sensor PST02-1C by Philio you can not only monitor your door’s and window’s status, because the device is equipped with 3 different sensors in total: Door/Window Sensor Temperature Sensor Light Sensor The sensor consists...
Content
1 Item(s)
48.11€
*
(RRP)
Philio 3-in-1 Sensor - Flood, Temperature and...
The Z-Wave 3 in 1 sensor is designed with three detection sensors: 1. Water/ Flood 2. Temperature 3. Humidity The detector can be used as a security device or home automation device. When the detector is cooperated with security...
Content
1 Item(s)
77.34€
*
(RRP)
Viewed