Prices incl. VAT plus shipping costs
- Order number: EVRESP816
- EAN: 4251295700625
- Manufacturer: Everspring
This motion detector (PIR = passive infrared receiver) detects the presence of a person in a room. The units send information to a controller or any other associated Z-Wave device. Up to 4 devices can be controlled from this device. It needs to be included into a Z-Wave network by a remote control or any other Z- Wave controller. For configuration of certain behaviour a static controller such as a PC with home automation software or a gateway is required.
The sensor is a battery-powered device, which is in sleeping state unless an action is detected. After a programmable sleeping time the device wakes up and sends a status information. After this the unit goes back to sleeping modus. Batteries can be changed without unscrewing the device from the door or frame. The unit will give a visual warning on the device and sends a warning to the Z-Wave controller, when batteries need to be replaced. The unit offers a tampering control and sends an alarm message when tampered.
- Z-Wave Plus, S2 Authentication
- EU frequency: 868,42 MHz
- Package content: 1x Everspreing Motion Detector, 3x AA batteries
- Power supply: 3x AA batteries
- IP 44 protection
- Battery lifetime: 2 years depending on the wake up interval
|Article Dimensions (WxHxL)||99 x 94 x 95 mm|
|Package Dimensions (WxHxL)||130 x 185 x 97 mm|
|Article net weight||0.243 Kg|
|Article gross weight||0.364 Kg|
Introduction To Z-Wave Plus™
Z-Wave Plus™ is a new step within the Z-Wave certification process, designed to help consumers identify products that take advantage of the recently introduced 'GEN5' Z-Wave hardware platform, also known as 500 Series or 5th Generation Z-Wave. Z-Wave Plus certified solutions feature a selected set of extended features and capabilities that enhance the end user experience and make Z-Wave installations even faster and easier to install and set up.
Z-Wave has led the market in interoperable smart devices for the home since the first Z-Wave product was certified in 2004. With the introduction of the GEN5, Z-Wave 500 series hardware platforms, Z-Wave saw its ecosystem bolstered with new capabilities – including increased range, extended battery life, Over-The-Air upgrading (OTA), additional RF channels and more.
Products with Z-Wave Plus™ are fully backwards compatible with existing Z-Wave products!
For consumers, homeowners, integrators and service providers, these enhancements offer tremendous benefits in terms of faster and easier installations, more extensive device profiles, improved self-healing and longer battery life. With the new Z-Wave Plus certification program, the Z-Wave Alliance is introducing a series of packaging logos that will be located on every Z-Wave Plus™ certified product, informing the consumer this product incorporates the enhanced capabilities of the Z-Wave 500 series.
- 50% improvement in battery life
- 67% improvement in range
- 250% more bandwidth
- Three F channels for improved noise immunity and higher bandwidth
- New Plug-and-Play network-wide inclusion functions
- Improved self-healing and fault tolerance with Explorer Frame feature
- Standardized method for Over-The-Air firmware updates (OTA)
- Improved product information capture for product certification database
|Z-Wave Controller||Controller Revision||Article Revision||Compatibility status||Comment|
|FIB_HOMEC2||4.130||1.1||not compatible||Motion does not work|
|ZIP_Zipabox-G1||1.2.29||1.1||not compatible||Motion does not work|
|FIB_FGHCL||4.130||1.1||not compatible||Motion does not work|
|FIB_HOMEC2||4.142||1.1||not compatible||Motion does not work|
|FIB_FGHCL||4.140||1.1||not compatible||Motion does not work|
|DEVE9278||1.1||not compatible||Motion does not work|
|MCVEVERA_PLUS||1.7.3232||1.1||not compatible||Motion does not work|