Prices incl. VAT plus shipping costs
- Order number: POPE009303
- EAN: 0019962009303
- Manufacturer: Popp
The Wall-C wall controller by POPP is a wireless wall switch can control Z-Wave devices such as lamps, shutters or switchable sockets directly as well as complex scenes via control center.
The device could be used as primary controller and secondary controller as well. In primary mode, devices can be connected to the Wall-C. Once one device is added to the wall controller, it checks the device type (switch, dimmer, shutter...) and assigns the buttons with correct commands.
In secondary mode, the Wall-C works via Z-Wave control center. Thus, it is also able to control complex pre-defined scenes (e.g. ‘All-off’ or a special light atmosphere).
With the battery-operated POPP wall controller, you can control your smart home from everywhere in the room, because the flat switch can be positioned on and removed from every planar surface without laying or pay attention cables. Using the wall controller is as simple as using an ordinary light switch – but with significantly more functions.
- 4-Button wall controller
- Buttons can be assigned free (as single buttons or button pairs)
- Direct device connection (controller function)
- Scene control (only) via Z-Wave gateway
- Easy installation
- Use as simple as an ordinary light switch – but much more versatile
- Frame and pushbutton in FOREVER design
- Supports security command class
- Longer battery life, due to optimized energy management
- Power Supply: 1x CR2032 battery (inclusive)
- Wireless Technology: Z-Wave Plus
|Article Dimensions (WxHxL)||80 x 80 x 20 mm|
|Package Dimensions (WxHxL)||70 x 88 x 85 mm|
|Article net weight||0.050 Kg|
|Article gross weight||0.095 Kg|
Introduction To Z-Wave Plus™
Z-Wave Plus™ is a new step within the Z-Wave certification process, designed to help consumers identify products that take advantage of the recently introduced 'GEN5' Z-Wave hardware platform, also known as 500 Series or 5th Generation Z-Wave. Z-Wave Plus certified solutions feature a selected set of extended features and capabilities that enhance the end user experience and make Z-Wave installations even faster and easier to install and set up.
Z-Wave has led the market in interoperable smart devices for the home since the first Z-Wave product was certified in 2004. With the introduction of the GEN5, Z-Wave 500 series hardware platforms, Z-Wave saw its ecosystem bolstered with new capabilities – including increased range, extended battery life, Over-The-Air upgrading (OTA), additional RF channels and more.
Products with Z-Wave Plus™ are fully backwards compatible with existing Z-Wave products!
For consumers, homeowners, integrators and service providers, these enhancements offer tremendous benefits in terms of faster and easier installations, more extensive device profiles, improved self-healing and longer battery life. With the new Z-Wave Plus certification program, the Z-Wave Alliance is introducing a series of packaging logos that will be located on every Z-Wave Plus™ certified product, informing the consumer this product incorporates the enhanced capabilities of the Z-Wave 500 series.
- 50% improvement in battery life
- 67% improvement in range
- 250% more bandwidth
- Three F channels for improved noise immunity and higher bandwidth
- New Plug-and-Play network-wide inclusion functions
- Improved self-healing and fault tolerance with Explorer Frame feature
- Standardized method for Over-The-Air firmware updates (OTA)
- Improved product information capture for product certification database
|Z-Wave Controller||Controller Revision||Article Revision||Compatibility status||Comment|
|MCV_VERA_EDGE||1.7.2236||1.1||not compatible||inclusion is possible, but you cannot use it in a scene|
|ZIP_Zipabox-G1||1.1.35||1.1||not compatible||not possible to include the device|
|POPE011801||v2.2.5||1.1||partly compatible||recognized as KFOBC but compatible and worked in a small scene|
|ZMEEUZBWD||v2.2.5||1.1||partly compatible||recognized as KFOBC but compatible and worked in a small scene|
|ZMEEUZB1||v2.2.5||1.1||partly compatible||recognized as KFOBC but compatible and worked in a small scene|
|ZMEEUZBWAY||v2.2.5||1.1||partly compatible||recognized as KFOBC but compatible and worked in a small scene|
|ZMEERAZ2||v2.2.5||1.1||partly compatible||recognized as KFOBC but compatible and worked in a small scene|
|FIB_HOMEC2||v4.100||1.1||partly compatible||only with LUA|