Prices incl. VAT plus shipping costs
- Order number: GOAEZMNHHD1
- EAN: 3830062071673
- Manufacturer: Qubino (Goap)
- Manufacturer number: ZMNHHD1
With the Qubino Mini Dimmer, existing lighting installations can be integrated into a Z-Wave network. Thus, the connected lights can still be switched and dimmed with the existing wall switch, but – thanks to Z-Wave – also via remote control, smartphone or sensor-controlled automation.
The currently smallest Z-Wave radio module is placed in a wall box right behind the normal switch. The switch is no longer directly connected to the load but acts as input device for the Qubino insert that is controlling the load. The switch only sends control signal to the insert which controls the load then again. The Qubino Mini Dimmer works with all switch designs. You can use a momentary or a toggle switch. It’s recommended to use wall boxes with 65mm depth. But smaller boxes with only 45mm depth can be used also if there is enough space behind the switch. The available space depends on the size of the traditional switch, the dimensions of the wall box and the amount of additional cabling placed in this box.
If you would like to know more about smart dimmers, you're more than welcome to take a look at Qubinos newest blog articles. In the first part of the article, they'll guide you through everything you need to know about dimming. Turning your lights smart and being able to control them with a simple tap on your smartphone, would be the next step. Qubino also tested more than 35 bulbs - dimmable and non-dimmable, from different manufacturers as Ikea, Osram, Philips, Verbatim and others with Qubino Mini Dimmer. Click here for results.
- 2 wired and 3 wired system supported
- Energy measurement function
- Power supply: 110 - 240 VAC, 50/60 Hz ; 24-30 VDC only for inclusion and exclusion
- Output circuit power: 200W (240 VAC) ; 90W (110 VAC)
- Trailing edge dimmer - MOSFET
- Operating Temperature: -10°C ~ +40°C
- Wireless Technology: Z-Wave Plus
- S2 Securtity
- Dimensions: 38 x 33 x 15,5 mm
|Article Dimensions (WxHxL)||33 x 38 x 15.5 mm|
|Package Dimensions (WxHxL)||73 x 85 x 42 mm|
|Article net weight||0.024 Kg|
|Article gross weight||0.050 Kg|
Introduction To Z-Wave Plus™
Z-Wave Plus™ is a new step within the Z-Wave certification process, designed to help consumers identify products that take advantage of the recently introduced 'GEN5' Z-Wave hardware platform, also known as 500 Series or 5th Generation Z-Wave. Z-Wave Plus certified solutions feature a selected set of extended features and capabilities that enhance the end user experience and make Z-Wave installations even faster and easier to install and set up.
Z-Wave has led the market in interoperable smart devices for the home since the first Z-Wave product was certified in 2004. With the introduction of the GEN5, Z-Wave 500 series hardware platforms, Z-Wave saw its ecosystem bolstered with new capabilities – including increased range, extended battery life, Over-The-Air upgrading (OTA), additional RF channels and more.
Products with Z-Wave Plus™ are fully backwards compatible with existing Z-Wave products!
For consumers, homeowners, integrators and service providers, these enhancements offer tremendous benefits in terms of faster and easier installations, more extensive device profiles, improved self-healing and longer battery life. With the new Z-Wave Plus certification program, the Z-Wave Alliance is introducing a series of packaging logos that will be located on every Z-Wave Plus™ certified product, informing the consumer this product incorporates the enhanced capabilities of the Z-Wave 500 series.
- 50% improvement in battery life
- 67% improvement in range
- 250% more bandwidth
- Three F channels for improved noise immunity and higher bandwidth
- New Plug-and-Play network-wide inclusion functions
- Improved self-healing and fault tolerance with Explorer Frame feature
- Standardized method for Over-The-Air firmware updates (OTA)
- Improved product information capture for product certification database
The foundation of S2 is everything you need for a smart home: the latest version of Z-Wave, reducing power consumption compared to older Z-Wave devices and wireless communication. S2 does all this and expands the Z-Wave world:
- Advanced encryption (AES 128-bit)
- More security against hacker attacks
- Improved battery life
- Faster communication between devices
|Z-Wave Controller||Controller Revision||Article Revision||Compatibility status||Comment|