Prices incl. VAT plus shipping costs
- Order number: AEOEZW111
- EAN: 1220000013971
- Manufacturer: Aeotec
With the AEOTEC Nano Dimmer switchable and dimmable electric installations such as lighting or ceiling fans can be integrated into a Z-Wave network. Thus, the connected load can be switched and dimmed both wirelessly via Z-Wave and locally via existing wall switch. The AEOTEC Nano Dimmer adjusts oneself to the connected lighting automatically and is therewith useable with various lighting kind of lighting (LED, Dimmable LED, CFL, Fluorescent, Incandescent, Halogen). Combined with an appropriate Bypass, it can even dim low power LEDs and CFLs that use less than 20 watts.
The compact radio module (60% smaller than its predecessor Micro Dimmer) is placed in a wall box right behind the normal switch. The switch is no longer directly connected to the load but acts as input device for the AEOTEC insert that is controlling the load. The switch only sends control signal to the insert which controls the load then again. The solution works with all switch design. You can use a momentary or a toggle switch. It’s recommended to use wall boxes with 65mm depth. But smaller boxes with only 45mm depth can be used also if there is enough space behind the switch. The available space depends on the size of the traditional switch, the dimensions of the wall box and the amount of additional cabling placed in this box.
- Flush-mounted radio module
- Integrates existing installations (lighting, ceiling fans) into a Z-Wave network
- Works with momentary or toggle switches
- Power supply: 230V, 50Hz
- Wiring: Compatible with 2-wire and 3-wire systems (with and without neutral)
- Power consumption: < 0.8 W
- Wireless technology: Z-Wave Plus
- Dimensions: 42.5x40x20 mm
|Article Dimensions (WxHxL)||39 x 42 x 20 mm|
|Package Dimensions (WxHxL)||73 x 74 x 31 mm|
|Article net weight||0.027 Kg|
|Article gross weight||0.051 Kg|
Introduction To Z-Wave Plus™
Z-Wave Plus™ is a new step within the Z-Wave certification process, designed to help consumers identify products that take advantage of the recently introduced 'GEN5' Z-Wave hardware platform, also known as 500 Series or 5th Generation Z-Wave. Z-Wave Plus certified solutions feature a selected set of extended features and capabilities that enhance the end user experience and make Z-Wave installations even faster and easier to install and set up.
Z-Wave has led the market in interoperable smart devices for the home since the first Z-Wave product was certified in 2004. With the introduction of the GEN5, Z-Wave 500 series hardware platforms, Z-Wave saw its ecosystem bolstered with new capabilities – including increased range, extended battery life, Over-The-Air upgrading (OTA), additional RF channels and more.
Products with Z-Wave Plus™ are fully backwards compatible with existing Z-Wave products!
For consumers, homeowners, integrators and service providers, these enhancements offer tremendous benefits in terms of faster and easier installations, more extensive device profiles, improved self-healing and longer battery life. With the new Z-Wave Plus certification program, the Z-Wave Alliance is introducing a series of packaging logos that will be located on every Z-Wave Plus™ certified product, informing the consumer this product incorporates the enhanced capabilities of the Z-Wave 500 series.
- 50% improvement in battery life
- 67% improvement in range
- 250% more bandwidth
- Three F channels for improved noise immunity and higher bandwidth
- New Plug-and-Play network-wide inclusion functions
- Improved self-healing and fault tolerance with Explorer Frame feature
- Standardized method for Over-The-Air firmware updates (OTA)
- Improved product information capture for product certification database
|Z-Wave Controller||Controller Revision||Article Revision||Compatibility status||Comment|
|FIB_HOMEC2||4.130||1.2||fully compatible||Parameter 80, 101, 111 must be set for a function|
|FIB_HOMEC2||4.180||2.2||fully compatible||Parameter 80, 101, 111 must be set for a function|
|FIB_HOMEC2||4.120||1.1||fully compatible||Parameter 80, 101, 111 must be set for a function|
|FIB_HOMEC2||4.510||2.2||fully compatible||Parameter 80, 101, 111 must be set for a function|
|MCV_VERA_EDGE||1.7.2236||1.1||partly compatible||Parameter 101, 111 must be set for a function. Measuring only Watts|
|MCVEVERA_PLUS||1.7.3015||1.2||partly compatible||Parameter 101, 111 must be set for a function. Measuring only Watts|