Prices incl. VAT plus shipping costs
- Order number: GOAEZMNHID1
- EAN: 3830062070133
- Manufacturer: Qubino (Goap)
The Qubino On/Off Thermostat is ideal to control electric or water-based underfloor heating systems. The Thermostat module can be connected with your existing electric or water-based underfloor heating. Thanks to the very small size of the module it can be mounted almost everywhere like in a wallbox. Besides the thermostat measures the temperature through a digital sensor.
The On/Off Thermostat can be easily retrofitted. When the device is connected to your underfloor heating System it can be switched by a wallswitch, a binary sensor or over the Z-Wave technology. Furthermore the thermostat can be time or app controlled over a Z-Wave gateway. Besides the digital temperature sensor reports the temperature to the Z-Wave Gateway.
- Z-Wave Plus
- EU frequency: 868,42 MHz
- Package content: 1x Heat & Cool Thermostat with temperature sensor
- Power supply: 110-230V AC
- Output power: 2300W 230V AC / 2540W 24V DC
- Heating system: electric or water-based underfloor heating systems
- Digital temperaturesensor: -50°C ~ 125°C; Length: 100cm
- Standby electricity consumption: 0,4 Watt
The Qubino modules upgrade your common switches with Smart Home Z-Wave technology. Unmount your installed switches. Connect the Qubino module with your existing electrical installation. Then mount the switch on the flush box again. Now you can connect your lamp, fan or heating with a Z-Wave gateway and automate your home.
|Article Dimensions (WxHxL)||70 x 70 x 20 mm|
|Package Dimensions (WxHxL)||95 x 113 x 23 mm|
|Article net weight||0.050 Kg|
|Article gross weight||0.062 Kg|
Introduction To Z-Wave Plus™
Z-Wave Plus™ is a new step within the Z-Wave certification process, designed to help consumers identify products that take advantage of the recently introduced 'GEN5' Z-Wave hardware platform, also known as 500 Series or 5th Generation Z-Wave. Z-Wave Plus certified solutions feature a selected set of extended features and capabilities that enhance the end user experience and make Z-Wave installations even faster and easier to install and set up.
Z-Wave has led the market in interoperable smart devices for the home since the first Z-Wave product was certified in 2004. With the introduction of the GEN5, Z-Wave 500 series hardware platforms, Z-Wave saw its ecosystem bolstered with new capabilities – including increased range, extended battery life, Over-The-Air upgrading (OTA), additional RF channels and more.
Products with Z-Wave Plus™ are fully backwards compatible with existing Z-Wave products!
For consumers, homeowners, integrators and service providers, these enhancements offer tremendous benefits in terms of faster and easier installations, more extensive device profiles, improved self-healing and longer battery life. With the new Z-Wave Plus certification program, the Z-Wave Alliance is introducing a series of packaging logos that will be located on every Z-Wave Plus™ certified product, informing the consumer this product incorporates the enhanced capabilities of the Z-Wave 500 series.
- 50% improvement in battery life
- 67% improvement in range
- 250% more bandwidth
- Three F channels for improved noise immunity and higher bandwidth
- New Plug-and-Play network-wide inclusion functions
- Improved self-healing and fault tolerance with Explorer Frame feature
- Standardized method for Over-The-Air firmware updates (OTA)
- Improved product information capture for product certification database
|Z-Wave Controller||Controller Revision||Article Revision||Compatibility status||Comment|
|FIB_HOMEC2||4.130||5.2||fully compatible||Consumption is not displayed|
|POPE700823||2.3.4||5.2||partly compatible||Values are not updated It is recommended to use APP'S - Periodic Switch Polling - Periodical Sensor Polling.|
|POPE700823||2.3.6||5.2||fully compatible||54/5000 Re-setting the association group 1 required|
|POPE011801||2.3.4||5.2||partly compatible||Values are not updated It is recommended to use APP'S - Periodic Switch Polling - Periodical Sensor Polling.|
|POPE011801||2.3.6||5.2||fully compatible||54/5000 Re-setting the association group 1 required|
|ZMEERAZ||2.3.4||5.2||partly compatible||Values are not updated It is recommended to use APP'S - Periodic Switch Polling - Periodical Sensor Polling.|
|ZMEERAZ||2.3.6||5.2||fully compatible||54/5000 Re-setting the association group 1 required|
|ZMEEUZBWAY||2.3.6||5.2||fully compatible||54/5000 Re-setting the association group 1 required|
|MCV_VERA_EDGE||1.7.2236||3.1||partly compatible||temperature Sensor not view|
|ZMEEUZBWD||2.3.6||5.2||fully compatible||54/5000 Re-setting the association group 1 required|
|ZMEERAZ2||2.3.6||5.2||fully compatible||54/5000 Re-setting the association group 1 required|
|ZMEEUZB1||2.3.6||5.2||fully compatible||54/5000 Re-setting the association group 1 required|
|ZIP_Zipabox-G1||1.1.38||3.1||not compatible||no device|