POPP Z-Weather (US frequency)

POPP Z-Weather (US frequency)
128.00€ * (RRP)

Prices incl. VAT plus shipping costs

  • B_POPU005206
  • Popp
The Z-Weather is an energy-self-sufficient wind and weather sensor, powered by a solar cell.... more
Product information "POPP Z-Weather (US frequency)"

The Z-Weather is an energy-self-sufficient wind and weather sensor, powered by a solar cell. Thanks to the energy management and the internal capacitor the wind sensor sends measured data to the Z-Wave Controller even during the night. The built-in energy manager automatically calculates and sets the wake-up interval between 5 minutes (on sunny days) and 1-2 hours on cloudy days or at the beginning of the day. Additionally, the energy management protects against full discharging and enables continuous operation for reporting gusting wind, storm or dusk in case of emergency and triggers appropriate actions. 

The multifunctional sensor can capture and send different values via Z-Wave to the smart home center: 

  • Wind Speed
  • Air Temperature
  • Relative Humidity
  • Light Intensity
  • Air Pressure
  • Dew Point

In addition, Z-Weather captures the energy delivered by the solar cell and calculates the possible energy yield of a photovoltaics system at the same place. The measurement of the solar cell’s yield is normalized to a solar module of 1 square meter and reported with 16% efficiency in kWh. To calculate the wind yield, every eighth rotation is counted and the total sum is reported as Pulse. 

Thanks to Z-Weather you can trigger closing of the awning and blinds either by direct associated devices or scenes. Measures of the ambient light and the solar yield can be used to turn on the outdoor light at dusk time and turn the light off in the morning.

Features:

  • World’s first energy-self-sufficient Z-Wave wireless sensor (solar-powered)
  • First wind sensor with Z-Wave technology
  • Multifunctional sensor measures different environment values (wind speed, air temperature, relative humidity, light intensity, air pressure, dew point)
  • Direct device associations (e.g. closing the awnings independently from control center)
  • Provides data on the yield of solar and wind energy
  • Wireless Technology: Z-Wave Plus
  • Dimensions: 300 x 121 x 330 mm

Before you can configure and use Z-Weather, the unit needs to be fully charged by direct sunlight for 4-6 hours. Without direct sun light, charging may take up to 12 hours.

We would like to point out that this article is not a new product. The product has got the complete functionality and can be integrated into a Z-Wave Smart Home without restriction.

However, the product may have the following characteristics:

  • broken seal,
  • damaged packaging,
  • no original packaging
  • missing accessories,
  • minimal signs of wear,
  • no current software version.

We offer to you a guarantee of 1 year. With a possible return you receive a credit note, there is no exchange of the product.

The picture may not correspond to the scope of delivery of the product.

If you are interested in a larger quantity of used products, please contact your sales representative.

Related links to "POPP Z-Weather (US frequency)"
Additional Data more
Article Dimensions (WxHxL) 300 x 121 x 330 mm
Package Dimensions (WxHxL) 91.8 x 98.5 x 244 mm
Article net weight 0.300 Kg
Article gross weight 0.401 Kg
Z-Wave Plus
Z-Wave Plus more

Introduction To Z-Wave Plus™

Z-Wave Plus™ is a new step within the Z-Wave certification process, designed to help consumers identify products that take advantage of the recently introduced 'GEN5' Z-Wave hardware platform, also known as 500 Series or 5th Generation Z-Wave. Z-Wave Plus certified solutions feature a selected set of extended features and capabilities that enhance the end user experience and make Z-Wave installations even faster and easier to install and set up.

Z-Wave has led the market in interoperable smart devices for the home since the first Z-Wave product was certified in 2004. With the introduction of the GEN5, Z-Wave 500 series hardware platforms, Z-Wave saw its ecosystem bolstered with new capabilities – including increased range, extended battery life, Over-The-Air upgrading (OTA), additional RF channels and more.

Products with Z-Wave Plus™ are fully backwards compatible with existing Z-Wave products!

For consumers, homeowners, integrators and service providers, these enhancements offer tremendous benefits in terms of faster and easier installations, more extensive device profiles, improved self-healing and longer battery life. With the new Z-Wave Plus certification program, the Z-Wave Alliance is introducing a series of packaging logos that will be located on every Z-Wave Plus™ certified product, informing the consumer this product incorporates the enhanced capabilities of the Z-Wave 500 series.

Features

  • 50% improvement in battery life
  • 67% improvement in range
  • 250% more bandwidth
  • Three F channels for improved noise immunity and higher bandwidth
  • New Plug-and-Play network-wide inclusion functions
  • Improved self-healing and fault tolerance with Explorer Frame feature 
  • Standardized method for Over-The-Air firmware updates (OTA)
  • Improved product information capture for product certification database
POPP Z-Rain POPP Z-Rain
Content 1 Item(s)
79.99€ * (RRP)
FIBARO Door/Window Sensor 2 FIBARO Door/Window Sensor 2
29.49€ * (RRP)
POPP Z-Weather POPP Z-Weather
Content 1 Item(s)
199.99€ * (RRP)
FIBARO Flood Sensor (HomeKit) FIBARO Flood Sensor (HomeKit)
50.91€ * (RRP)
FOXX Range Extender Z-Wave Repeater FOXX Range Extender Z-Wave Repeater
28.26€ * (RRP)
FIBARO Flood Sensor FIBARO Flood Sensor
35.40€ * (RRP)
Everspring Switch Plug for Schuko Everspring Switch Plug for Schuko
20.78€ * (RRP)
POPP Z-Rain POPP Z-Rain
Content 1 Item(s)
79.99€ * (RRP)
POPP Flow Stop gas/water shut-off controller POPP Flow Stop gas/water shut-off controller
Content 1 Item(s)
148.75€ * (RRP)
Smart Home Kit - Raspberry 1 B+ & Z-Wave Razberry 2 (EU) Smart Home Kit - Raspberry 1 B+ & Z-Wave...
79.99€ * (RRP)
TKB Home Wall Plug with Dimmer Function (Type J) TKB Home Wall Plug with Dimmer Function (Type J)
30.80€ * (RRP)
NodOn Wall Switch NodOn Wall Switch
30.00€ * (RRP)
FOXX Door- and Window Sensor FOXX Door- and Window Sensor
30.46€ * (RRP)
FIBARO The Button FIBARO The Button
29.49€ * (RRP)
FIBARO The Button FIBARO The Button
29.49€ * (RRP)
FIBARO Door/Window Sensor 2 FIBARO Door/Window Sensor 2
29.49€ * (RRP)
FIBARO The Button (HomeKit) FIBARO The Button (HomeKit)
42.48€ * (RRP)
FIBARO Motion Sensor (HomeKit) FIBARO Motion Sensor (HomeKit)
49.45€ * (RRP)
Aeotec Door/Window Sensor 7 Aeotec Door/Window Sensor 7
40.00€ * (RRP)
HEIMAN Smoke Sensor HEIMAN Smoke Sensor
40.00€ * (RRP)
FIBARO The Button FIBARO The Button
Content 1 Item(s)
49.99€ * (RRP)
FIBARO_Double_Switch_2_-_2*1,5_kW FIBARO Double Switch 2
Content 1 Item(s)
59.99€ * (RRP)
FIBARO_Single_Switch_2_-_1*2,5_kW FIBARO Single Switch 2
Content 1 Item(s)
59.99€ * (RRP)
Remotec Z-Wave AC Master Remotec Z-Wave AC Master
94.99€ * (RRP)
Z-Wave Dana Lock square Z-Wave Dana Lock square
76.76€ * (RRP)
Zipato RGBW Bulb 2 Zipato RGBW Bulb 2
24.31€ * (RRP)
Sensative STRIPS Door and Window Sensor Sensative STRIPS Door and Window Sensor
31.20€ * (RRP)
Z-Wave Bluetooth Dana Lock square Z-Wave Bluetooth Dana Lock square
113.41€ * (RRP)
NodOn Smart Plug Type E NodOn Smart Plug Type E
26.59€ * (RRP)
FIBARO Motion Sensor (4-in-1 Multi Sensor) GEN 5 FIBARO Motion Sensor (4-in-1 Multi Sensor) GEN 5
34.20€ * (RRP)
FIBARO Door-/Window Sensor FIBARO Door-/Window Sensor
29.49€ * (RRP)
Viewed