Prices incl. VAT plus shipping costs
- Order number: AEOEZWA008
- EAN: 1220000016408
- Manufacturer: Aeotec
The Aeotec Door/Window Sensor 7 is a sensor, which detects, if your window is opened, closed or tilted which requires a tilt angle of at least 5°. The sensor is easily retrofittable. Furthermore, the Aeotec Door/Window Sensor 7 can include other sensors by being connected with other binary sensors like NTC contacts, micro switches or flood sensor.
Thanks to its slim design the Aeotec Door/Window Sensor 7 can be installed unflashy on every window. The sensor just has to be installed on the window casement. Additionally, there has to be a slim magnet installed closely to the sensor at the window frame.
With the potential free input the Aeotec Door/Window Sensor 7 can also include other sensors in your Z-Wave system. For that the binary sensor is connected to the potential free input of the sensor. Besides sensors there can also be connected momentary switches, which controls scenes in your gateway.
Should your Aeotec Door/Window Sensor 7 fail you once, the core - the circuit board - can be easily replaced without removing the sensor. This allows you to glue the device to the window frame and replace only the circuit board.
For further information klick here.
- Detection of open, closed or tilted thanks to patented sensor technology
- Residue-free and simple exchange of the circuit board
- Built in tamper protection
- Potential free binary input to connect external sensors
- Up to 3 years battery lifetime
- Tilt angle at least 5°
- Z-Wave Smart Start and S2 Security
- Wireless technology: Z-Wave Plus
|Article Dimensions (WxHxL)||18 x 70 x 20 mm|
|Package Dimensions (WxHxL)||73 x 121 x 33 mm|
|Article net weight||0.017 Kg|
|Article gross weight||0.062 Kg|
Introduction To Z-Wave Plus™
Z-Wave Plus™ is a new step within the Z-Wave certification process, designed to help consumers identify products that take advantage of the recently introduced 'GEN5' Z-Wave hardware platform, also known as 500 Series or 5th Generation Z-Wave. Z-Wave Plus certified solutions feature a selected set of extended features and capabilities that enhance the end user experience and make Z-Wave installations even faster and easier to install and set up.
Z-Wave has led the market in interoperable smart devices for the home since the first Z-Wave product was certified in 2004. With the introduction of the GEN5, Z-Wave 500 series hardware platforms, Z-Wave saw its ecosystem bolstered with new capabilities – including increased range, extended battery life, Over-The-Air upgrading (OTA), additional RF channels and more.
Products with Z-Wave Plus™ are fully backwards compatible with existing Z-Wave products!
For consumers, homeowners, integrators and service providers, these enhancements offer tremendous benefits in terms of faster and easier installations, more extensive device profiles, improved self-healing and longer battery life. With the new Z-Wave Plus certification program, the Z-Wave Alliance is introducing a series of packaging logos that will be located on every Z-Wave Plus™ certified product, informing the consumer this product incorporates the enhanced capabilities of the Z-Wave 500 series.
- 50% improvement in battery life
- 67% improvement in range
- 250% more bandwidth
- Three F channels for improved noise immunity and higher bandwidth
- New Plug-and-Play network-wide inclusion functions
- Improved self-healing and fault tolerance with Explorer Frame feature
- Standardized method for Over-The-Air firmware updates (OTA)
- Improved product information capture for product certification database
The foundation of S2 is everything you need for a smart home: the latest version of Z-Wave, reducing power consumption compared to older Z-Wave devices and wireless communication. S2 does all this and expands the Z-Wave world:
- Advanced encryption (AES 128-bit)
- More security against hacker attacks
- Improved battery life
- Faster communication between devices
|Z-Wave Controller||Controller Revision||Article Revision||Compatibility status||Comment|
|MCVEVERA_PLUS||1.7.4453||1.1||partly compatible||To show correct sensor type, change following under Advanced on the main device: device_type: urn:schemas-micasaverde-com:device:DoorSensor:1 , device_file: D_DoorSensor1.xml , device_json: D_DoorSensor1.json ; CentralScene is not supported.|
|MCVEVERA_PLUS||1.7.4453||1.0||partly compatible||To show correct sensor type, change following under Advanced on the main device: device_type: urn:schemas-micasaverde-com:device:DoorSensor:1 , device_file: D_DoorSensor1.xml , device_json: D_DoorSensor1.json ; CentralScene is not supported.|