Prices incl. VAT plus shipping costs
- Order number: ZWSEWP
- EAN: 4251295701004
- Manufacturer: Z-Wave Selection
- Manufacturer number: ZWSEWP
The Wall Plug is an intelligent, remotely controllable adapter that allows you to make any electrical device smart and easily switch it on or off via smartphone. At the same time the adapter measures the energy consumption of the connected devices and helps to identify power guzzlers.
On the way to work you can not remember if you have turned off the iron? As of now, this is no longer a reason for panic: with the Wall Plug, you can also switch off the device when you are on the move. Or you simply switch on the coffee machine in the office ... Connected to a Smart Home control center, these energy measurement data can be used to create scenarios and intelligent control of the devices. Coupled with a motion detector, for example, a lamp could be switched off when there is no one left in the room.
With its innovative design, the Wall Plug is one of the smallest connectors on the market: just plug it into the plug-in or distribution box and connect the desired electrical device to the power circuit via the intermediate plug. As soon as the Wall Plug is integrated into the Z-Wave ecosystem, the connected devices can be controlled or automated from anywhere. Thanks to an innovative technology, the adapter plug can even detect power failure and report it to your gateway.
With the Wall Plug you can intelligently integrate any electrical device into your Smart Home System, control and measure its power consumption to save energy.
- Z-Wave Plus certified Wall Plug (Type F)
- Easy Plug & Play installation
- Energy measurement function
- Control via Z-Wave or local button
- Automatic overload report and switch off
- Colored and changeable rubber rings included
- Power: 230 V AC 50 Hz
- Maximum load: 1840 W resistive load, 8A
- Z-Wave repeater function
- Dimensions: 44×44×78mm
|Article Dimensions (WxHxL)||44 x 44 x 78 mm|
|Package Dimensions (WxHxL)||101.31 x 54.23 x 98.76 mm|
|Article net weight||0.067 Kg|
|Article gross weight||0.119 Kg|
Introduction To Z-Wave Plus™
Z-Wave Plus™ is a new step within the Z-Wave certification process, designed to help consumers identify products that take advantage of the recently introduced 'GEN5' Z-Wave hardware platform, also known as 500 Series or 5th Generation Z-Wave. Z-Wave Plus certified solutions feature a selected set of extended features and capabilities that enhance the end user experience and make Z-Wave installations even faster and easier to install and set up.
Z-Wave has led the market in interoperable smart devices for the home since the first Z-Wave product was certified in 2004. With the introduction of the GEN5, Z-Wave 500 series hardware platforms, Z-Wave saw its ecosystem bolstered with new capabilities – including increased range, extended battery life, Over-The-Air upgrading (OTA), additional RF channels and more.
Products with Z-Wave Plus™ are fully backwards compatible with existing Z-Wave products!
For consumers, homeowners, integrators and service providers, these enhancements offer tremendous benefits in terms of faster and easier installations, more extensive device profiles, improved self-healing and longer battery life. With the new Z-Wave Plus certification program, the Z-Wave Alliance is introducing a series of packaging logos that will be located on every Z-Wave Plus™ certified product, informing the consumer this product incorporates the enhanced capabilities of the Z-Wave 500 series.
- 50% improvement in battery life
- 67% improvement in range
- 250% more bandwidth
- Three F channels for improved noise immunity and higher bandwidth
- New Plug-and-Play network-wide inclusion functions
- Improved self-healing and fault tolerance with Explorer Frame feature
- Standardized method for Over-The-Air firmware updates (OTA)
- Improved product information capture for product certification database
|Z-Wave Controller||Controller Revision||Article Revision||Compatibility status||Comment|
|FIB_HOMEC2||4.180||1.55||partly compatible||Status is not updated|
|FIB_HOMEC2||4.510||1.55||partly compatible||Status is not updated|