POPP Wall Controller 2

POPP Wall Controller 2
24.56€ * (RRP)

Prices incl. VAT plus shipping costs

  • B_POPE700861
  • Popp
The POPP Wall Controller 2 is a Z-Wave device that can activate predefined scenes in a Z-Wave... more
Product information "POPP Wall Controller 2"

The POPP Wall Controller 2 is a Z-Wave device that can activate predefined scenes in a Z-Wave gateway or directly controls other devices via association. Although it is controlling other devices, the Wall Controller 2 cannot act as a Z-Wave network controller (primary or secondary) and will always need a Z-Wave gateway to be included into a Z-Wave network. The device can be used in different modes that are selected by configuration parameters: 1. Activation of predefined scenes in gateways or other Z-Wave devices. 2. Control other Z-Wave devices via association using "ON", "OFF" or dimming commands. With the battery-operated POPP Wall Controller 2, you can control your smart home from everywhere in the room, because the flat switch can be positioned on every planar surface like a wall or your furniture. Using the Wall Controller 2 is as simple as using an ordinary light switch – but with significantly more functions.

Features:

  • 4-Button Wall Controller
  • Control up to 12 different scenes - each button controls scenes by single click, double click, hold and released
  • Scene control (only) via Z-Wave gateway
  • Easy installation
  • Use it as simple as an ordinary light switch – but much more versatile
  • Frame and rocker in Düwi EVERLUX design
  • Supports security command class
  • Longer battery life, due to optimized energy management
  • Power supply: 1x CR2032 battery (inclusive)
  • Scope of delivery: Wall Controller 2, mounting plate, frame and rocker (EVERLUX), battery CR2032
  • Wireless technology: Z-Wave Plus

We would like to point out that this article is not a new product. The product has got the complete functionality and can be integrated into a Z-Wave Smart Home without restriction. However, the product may have the following characteristics:

  • broken seal,
  • damaged packaging,
  • no original packaging
  • missing accessories,
  • minimal signs of wear,
  • no current software version.

We offer to you a guarantee of one year. With a possible return you receive a credit note, there is no exchange of the product.
The picture may not correspond to the scope of delivery of the product.
If you are interested in a larger quantity of used products, please contact your sales representative.

Related links to "POPP Wall Controller 2"
Additional Data more
Article Dimensions (WxHxL) 80 x 80 x 20 mm
Package Dimensions (WxHxL) 70 x 88 x 85 mm
Article net weight 0.048 Kg
Article gross weight 0.095 Kg
Z-Wave Plus
WEEE
CE
IP-Rating IP20
Z-Wave Plus more

Introduction To Z-Wave Plus™

Z-Wave Plus™ is a new step within the Z-Wave certification process, designed to help consumers identify products that take advantage of the recently introduced 'GEN5' Z-Wave hardware platform, also known as 500 Series or 5th Generation Z-Wave. Z-Wave Plus certified solutions feature a selected set of extended features and capabilities that enhance the end user experience and make Z-Wave installations even faster and easier to install and set up.

Z-Wave has led the market in interoperable smart devices for the home since the first Z-Wave product was certified in 2004. With the introduction of the GEN5, Z-Wave 500 series hardware platforms, Z-Wave saw its ecosystem bolstered with new capabilities – including increased range, extended battery life, Over-The-Air upgrading (OTA), additional RF channels and more.

Products with Z-Wave Plus™ are fully backwards compatible with existing Z-Wave products!

For consumers, homeowners, integrators and service providers, these enhancements offer tremendous benefits in terms of faster and easier installations, more extensive device profiles, improved self-healing and longer battery life. With the new Z-Wave Plus certification program, the Z-Wave Alliance is introducing a series of packaging logos that will be located on every Z-Wave Plus™ certified product, informing the consumer this product incorporates the enhanced capabilities of the Z-Wave 500 series.

Features

  • 50% improvement in battery life
  • 67% improvement in range
  • 250% more bandwidth
  • Three F channels for improved noise immunity and higher bandwidth
  • New Plug-and-Play network-wide inclusion functions
  • Improved self-healing and fault tolerance with Explorer Frame feature 
  • Standardized method for Over-The-Air firmware updates (OTA)
  • Improved product information capture for product certification database
Aeotec TriSensor Aeotec TriSensor
46.78€ * (RRP)
Danfoss HC5 (Hydronic contoller for 5 outputs) Danfoss HC5 (Hydronic contoller for 5 outputs)
Content 1 Item(s)
243.60€ * (RRP)
Aeotec MultiSensor 6 Aeotec MultiSensor 6
Content 1 Item(s)
58.48€ * (RRP)
POPP Smart Outdoor Plug POPP Smart Outdoor Plug
Content 1 Item(s)
58.48€ * (RRP)
Qubino 3-Phase Smart Meter Qubino 3-Phase Smart Meter
Content 1 Item(s)
165.71€ * (RRP)
FIBARO_Motion_Sensor_(4-in-1_Multi_Sensor)_GEN_5 FIBARO Motion Sensor (4-in-1 Multi Sensor) GEN 5
Content 1 Item(s)
56.53€ * (RRP)
Aeotec Recessed Door Sensor GEN5 Aeotec Recessed Door Sensor GEN5
Content 1 Item(s)
38.99€ * (RRP)
Z-Wave Presence Detector Z-Wave Presence Detector
Content 1 Item(s)
58.44€ * (RRP)
FIBARO Home Center 3 FIBARO Home Center 3
584.86€ * (RRP)
FIBARO CO Sensor FIBARO CO Sensor
57.76€ * (RRP)
Zipato Zipatile 2 Zipato Zipatile 2
584.06€ * (RRP)
Aeotec NanoMote Quad Aeotec NanoMote Quad
43.86€ * (RRP)
FIBARO Home Center 2 FIBARO Home Center 2
230.84€ * (RRP)
Sensative STRIPS Comfort Sensative STRIPS Comfort
Content 1 Item(s)
58.48€ * (RRP)
MCO Home - CO2 Sensor 230V MCO Home - CO2 Sensor 230V
Content 1 Item(s)
194.95€ * (RRP)
BeNext Panic Watch BeNext Panic Watch
Content 1 Item(s)
63.35€ * (RRP)
Aeotec Dual Nano Switch Aeotec Dual Nano Switch
Content 1 Item(s)
53.60€ * (RRP)
Viewed